ANKLE REPLACEMENT

A SUBSPECIALTY WITHIN FOOT & ANKLE SURGERY

A moving

A moving

A moving

ankle, not a

ankle, not a

ankle, not a

fused one.

fused one.

fused one.

Dr Mustafa Alttahir replaces arthritic ankles in selected patients — and rarely in isolation. The replacement is planned from your own CT with patient-specific cutting guides, as one part of a balanced foot and ankle: the heel, forefoot and ligament procedures it needs around it, in one operation or in stages, and a custom 3D-printed talus component for an ankle replacement where the talus itself has collapsed.

Dr Mustafa Alttahir replaces arthritic ankles in selected patients — and rarely in isolation. The replacement is planned from your own CT with patient-specific cutting guides, as one part of a balanced foot and ankle: the heel, forefoot and ligament procedures it needs around it, in one operation or in stages, and a custom 3D-printed talus component for an ankle replacement where the talus itself has collapsed.

AN ALIGNED REPLACEMENT · AN ALIGNED FOOT · A STABLE JOINT · A SHOEABLE FOOT · STRYKER INFINITY, INBONE AND INVISION · CT-BASED PROPHECY GUIDES · WHAT GOES WITH A REPLACEMENT →

CT PLAN · PATIENT-SPECIFIC GUIDES

CT PLAN · PATIENT-SPECIFIC GUIDES

CORONAL AXIS

4.6°

4.6°

SAGITTAL AXIS

2.6°

2.6°

TIBIA GUTTER

17.8°

17.8°

TALAR GUTTER

8.4°

8.4°

VARUS CORRECTION

20.6°

20.6°

IMPLANT

INBONE II · SZ 3 · 14·14·16

INBONE II · SZ 3 · 14·14·16

AT A GLANCE

The whole page in one minute — the detail follows below.

WHO THIS IS FOR

End-stage ankle arthritis — after injury, inflammatory disease or long-standing deformity — that limits walking, in a patient who wants to keep ankle movement rather than fuse the joint.

HOW YOU ARE ASSESSED

Examination of the whole leg and foot, weight-bearing ankle, foot and hindfoot alignment X-rays, and a CT for patient-specific planning; deformity cases are modelled in 3D first.

THE OPTIONS

Non-operative care and bracing; realignment or fusion where a replacement is not the right answer; total ankle replacement, often with hindfoot or ligament procedures so the ankle sits straight and stable; a custom 3D-printed talus component where the talus has collapsed.

THE COMMITMENT

A boot rather than a plaster, a wound check at two weeks, weight-bearing at six weeks — earlier where bone quality allows; a comfortable, shoeable foot usually by three to six months, with improvement continuing over a year.

NEXT STEP

Call the rooms on (02) 8882 9011 or (02) 9602 1113. A GP referral is needed for the Medicare rebate; fees are discussed with you first and confirmed in writing once surgery is booked.

ANKLE ARTHRITIS

Different from hip and knee.

Different from hip and knee.

Different from hip and knee.

Most ankle arthritis is post-traumatic — the long-term consequence of a fracture, a ligament injury or years of sprains. Primary osteoarthritis, the usual cause in the hip and knee, is uncommon in the ankle; inflammatory arthritis and avascular necrosis of the talus account for most of the rest.

Most ankle arthritis is post-traumatic — the long-term consequence of a fracture, a ligament injury or years of sprains. Primary osteoarthritis, the usual cause in the hip and knee, is uncommon in the ankle; inflammatory arthritis and avascular necrosis of the talus account for most of the rest.

That history matters twice over. Ankle arthritis patients are younger and more active than most hip and knee patients, so the lifespan of an implant is weighed more carefully. And an ankle that was injured years ago is usually an ankle that has drifted out of line since — a heel tilted into varus or valgus, ligaments that no longer hold, a forefoot that has adapted to the tilt. The arthritis is rarely the whole problem, which is why Dr Alttahir rarely treats it with a replacement alone.

That history matters twice over. Ankle arthritis patients are younger and more active than most hip and knee patients, so the lifespan of an implant is weighed more carefully. And an ankle that was injured years ago is usually an ankle that has drifted out of line since — a heel tilted into varus or valgus, ligaments that no longer hold, a forefoot that has adapted to the tilt. The arthritis is rarely the whole problem, which is why Dr Alttahir rarely treats it with a replacement alone.

78%

78%

POST-TRAUMATIC — SERIES OF 406 END-STAGE ANKLES

3.4%

3.4%

ADULTS OVER 50 WITH SYMPTOMATIC ANKLE ARTHRITIS

3 in 5

3 in 5

FOLLOW A FRACTURE, 1 IN 6 A LIGAMENT INJURY

Alignment

Alignment

THE FIRST QUESTION

SOURCES: VALDERRABANO ET AL., CLIN ORTHOP RELAT RES 2009 · MURRAY ET AL., PLOS ONE 2018

THE PRACTICE

Not an occasional operation.

Not an occasional operation.

Not an occasional operation.

Ankle replacement is a core part of Dr Mustafa Alttahir’s practice. He learned the operation from Dr Tim O’Carrigan, who built a dedicated ankle replacement practice in Sydney, and continues that practice following Dr O’Carrigan’s death in February 2026 — the approach on this page is his, refined with the 3D planning and custom-implant work Dr Alttahir has developed since.

He performs ankle replacement, including with a custom 3D-printed talus component, at all four of his Sydney hospitals and as a visiting surgeon at the Al Muderis Osseointegration Clinic, Burjeel Medical City, Abu Dhabi.

EVERY REPLACEMENT IS JUDGED ON FOUR THINGS

01

An aligned replacement

An aligned replacement

Set square to the axis of the leg, planned on the CT and cut with patient-specific guides, so the load passes through the centre of the implant.

Set square to the axis of the leg, planned on the CT and cut with patient-specific guides, so the load passes through the centre of the implant.

02

An aligned foot beneath it

An aligned foot beneath it

Hindfoot, midfoot and forefoot corrected so the foot sits flat under the replacement — the procedures described further down this page.

Hindfoot, midfoot and forefoot corrected so the foot sits flat under the replacement — the procedures described further down this page.

03

A stable joint

A stable joint

Ligaments repaired or reconstructed so the replaced ankle is held square and does not tilt within the implant.

Ligaments repaired or reconstructed so the replaced ankle is held square and does not tilt within the implant.

04

A shoeable foot

A shoeable foot

A foot that stands flat and fits an ordinary shoe is the measure of a finished reconstruction — not the implant alone.

A foot that stands flat and fits an ordinary shoe is the measure of a finished reconstruction — not the implant alone.

Dr Mustafa Alttahir in theatre

DR ALTTAHIR IN THEATRE

FOUNDATIONS · DR TIM O’CARRIGAN, SYDNEY · IBRA FELLOWSHIP · PROFESSOR VICTOR VALDERRABANO, SWITZERLAND · PROFESSOR MARIO HERRERA-PEREZ, SPAIN · PRINCE OF WALES HOSPITAL FOOT & ANKLE UNIT

STRYKER PROPHECY CT GUIDES — DESIGNED IN-HOUSE WHEN THE MANUFACTURER CANNOT MAKE THEM · CUSTOM 3D-PRINTED TALUS COMPONENT FOR AN ANKLE REPLACEMENT · PUBLISHED ON TOTAL ANKLE REPLACEMENT · FOUR SYDNEY HOSPITALS · ABU DHABI

PATIENTS OF DR O’CARRIGAN

Your follow-up continues.

Your follow-up continues.

If Dr O’Carrigan looked after your ankle, your records and follow-up now sit with Dr Alttahir at the same rooms. Call the rooms, or ask your GP to send a referral addressed to Dr Alttahir.

If Dr O’Carrigan looked after your ankle, your records and follow-up now sit with Dr Alttahir at the same rooms. Call the rooms, or ask your GP to send a referral addressed to Dr Alttahir.

CAMPBELLTOWN · LIMB RECONSTRUCTION SERVICE NEW SOUTH WALES

MACQUARIE UNIVERSITY HOSPITAL · SYDNEY ADVANCED ORTHOPAEDICS

THE DECISION

Replacement or fusion.

Replacement or fusion.

Replacement or fusion.

Both operations are valid and both relieve pain. They are not the same operation, and neither is universally better — the question is which is right for the patient in front of him, and whichever is chosen, the alignment of the foot has to be corrected with it.

Both operations are valid and both relieve pain. They are not the same operation, and neither is universally better — the question is which is right for the patient in front of him, and whichever is chosen, the alignment of the foot has to be corrected with it.

Replacement

TAR

The worn surfaces of the tibia and talus are resurfaced with metal components and a polyethylene bearing. The ankle keeps moving.

ADVANTAGES

Preserves ankle motion

A more natural gait, especially on uneven ground

May spare the joints below and in front from accelerated wear

Ankle motion preserved for stairs and slopes

TRADE-OFFS

Finite lifespan — like hip and knee implants, it can wear or loosen

Depends on good bone and a stable, aligned foot

Not suitable for every deformity, even in stages

High-impact activity is discouraged for the life of the implant

BEST SUITED TO

Patients with end-stage arthritis, adequate bone, a deformity that can be corrected, ligaments that are intact or can be reconstructed, and realistic expectations of an implant’s lifespan.

Replacement

TAR

The worn surfaces of the tibia and talus are resurfaced with metal components and a polyethylene bearing. The ankle keeps moving.

ADVANTAGES

Preserves ankle motion

A more natural gait, especially on uneven ground

May spare the joints below and in front from accelerated wear

Ankle motion preserved for stairs and slopes

TRADE-OFFS

Finite lifespan — like hip and knee implants, it can wear or loosen

Depends on good bone and a stable, aligned foot

Not suitable for every deformity, even in stages

High-impact activity is discouraged for the life of the implant

BEST SUITED TO

Patients with end-stage arthritis, adequate bone, a deformity that can be corrected, ligaments that are intact or can be reconstructed, and realistic expectations of an implant’s lifespan.

Fusion

Arthrodesis

The tibia and talus are joined so the joint no longer moves and the worn surfaces no longer rub against each other.

ADVANTAGES

Durable — no implant to wear out

Tolerates severe deformity and bone loss

Tolerates heavy and high-impact work

Long established

TRADE-OFFS

No ankle motion — the joints below and in front compensate

An altered gait

Those compensating joints may wear faster over the years

Longer healing, and the fusion can fail to unite

BEST SUITED TO

Younger, heavy-demand patients; deformity or bone loss beyond what a replacement can be realigned to accept; poor bone quality; prior infection; and a failed replacement in selected cases.

Fusion

Arthrodesis

The tibia and talus are joined so the joint no longer moves and the worn surfaces no longer rub against each other.

ADVANTAGES

Durable — no implant to wear out

Tolerates severe deformity and bone loss

Tolerates heavy and high-impact work

Long established

TRADE-OFFS

No ankle motion — the joints below and in front compensate

An altered gait

Those compensating joints may wear faster over the years

Longer healing, and the fusion can fail to unite

BEST SUITED TO

Younger, heavy-demand patients; deformity or bone loss beyond what a replacement can be realigned to accept; poor bone quality; prior infection; and a failed replacement in selected cases.

THE HONEST ANSWER

It depends on the patient.

It depends on the patient.

Modern replacement designs are good — and so is a well-performed fusion. The right operation depends on age, activity, occupation, deformity, bone quality, ligament integrity and the state of the joints around the ankle. Dr Alttahir makes the decision with the patient, with a clear account of what either operation can and cannot offer. In very select cases a fusion done years earlier can be taken down and converted to a replacement.

CANDIDACY

Who is suitable for replacement.

Who is suitable for replacement.

Who is suitable for replacement.

GENERALLY GOOD CANDIDATES

End-stage ankle arthritis

End-stage ankle arthritis

Confirmed on weight-bearing X‑rays and CT.

Pain not controlled non-operatively

Pain not controlled non-operatively

Bracing, footwear changes, injections and anti-inflammatories have failed.

Adequate bone stock

Adequate bone stock

Especially in the talus.

Alignment that can be corrected

Alignment that can be corrected

At the same operation, or in a first stage before the replacement.

Ligaments that are intact or can be reconstructed

Ligaments that are intact or can be reconstructed

Lateral and medial (deltoid) stability.

Realistic expectations

Realistic expectations

Including willingness to moderate high-impact activity for the life of the implant.

OFTEN BETTER SUITED TO FUSION

Deformity that cannot be corrected

Deformity that cannot be corrected

Beyond what osteotomies, staging and implant alignment can compensate.

Poor bone quality

Poor bone quality

Severe osteoporosis or extensive death of the talus (avascular necrosis) — a custom 3D-printed talus component is the exception in selected cases.

Younger, heavy-demand patients

Younger, heavy-demand patients

Manual labour, contact sport, military and agricultural work.

Active or recent infection

Active or recent infection

Replacement is deferred, or fusion is chosen instead.

Poor skin or circulation over the ankle

Poor skin or circulation over the ankle

Severe scarring, adherent skin grafts or peripheral vascular disease — wound healing and infection risk.

Charcot neuropathic ankle

Charcot neuropathic ankle

Replacement is generally contraindicated.

Smoking, diabetes and body weight raise the complication rate of either operation and are part of the discussion before any decision.

Smoking, diabetes and body weight raise the complication rate of either operation and are part of the discussion before any decision.

ALIGNMENT & STABILITY

Rarely done in isolation.

Rarely done in isolation.

Rarely done in isolation.

A replaced ankle only works if the foot beneath it is straight and the ligaments around it hold it still. An arthritic ankle has usually been drifting for years — the heel tilted into varus or valgus, the forefoot adapted to the tilt, the ligaments stretched or scarred — and a replacement set onto that foot would tilt and wear with it.

So Dr Alttahir models every deformity case in 3D from the CT before the replacement is planned, and treats the replacement as one step in a balanced foot and ankle. Deformity above the ankle, in the tibia, is corrected with a supramalleolar osteotomy; deformity in the foot with the procedures below — in the same operation, or in stages.

A replaced ankle only works if the foot beneath it is straight and the ligaments around it hold it still. An arthritic ankle has usually been drifting for years — the heel tilted into varus or valgus, the forefoot adapted to the tilt, the ligaments stretched or scarred — and a replacement set onto that foot would tilt and wear with it.

So Dr Alttahir models every deformity case in 3D from the CT before the replacement is planned, and treats the replacement as one step in a balanced foot and ankle. Deformity above the ankle, in the tibia, is corrected with a supramalleolar osteotomy; deformity in the foot with the procedures below — in the same operation, or in stages.

01 · HINDFOOT ALIGNMENT

Straightening the heel

Straightening the heel

A calcaneal osteotomy — a heel shift — moves the heel bone inwards or outwards so that it sits squarely under the leg and the load passes through the centre of the new joint rather than its edge.

A calcaneal osteotomy — a heel shift — moves the heel bone inwards or outwards so that it sits squarely under the leg and the load passes through the centre of the new joint rather than its edge.

02 · STABILITY

Repairing or rebuilding the ligaments

Repairing or rebuilding the ligaments

The lateral ligaments, or the deltoid ligament on the inner side, are repaired or reconstructed so that the replaced ankle is held square and the bearing is not tilted or driven to one side.

The lateral ligaments, or the deltoid ligament on the inner side, are repaired or reconstructed so that the replaced ankle is held square and the bearing is not tilted or driven to one side.

03 · FOREFOOT BALANCE

Levelling the forefoot

Levelling the forefoot

Once the heel is straight the forefoot may no longer sit flat. A dorsiflexion osteotomy of the first metatarsal, minimally invasive osteotomies of the second to fifth metatarsals (DMMOs), a Cotton osteotomy of the medial cuneiform or a lateral column lengthening of the calcaneus — whichever the foot needs — brings it back to the ground.

Once the heel is straight the forefoot may no longer sit flat. A dorsiflexion osteotomy of the first metatarsal, minimally invasive osteotomies of the second to fifth metatarsals (DMMOs), a Cotton osteotomy of the medial cuneiform or a lateral column lengthening of the calcaneus — whichever the foot needs — brings it back to the ground.

04 · SOFT TISSUE

Releasing what pulls the foot out of line

Releasing what pulls the foot out of line

A plantar fascia release where the arch is high and tight; a prophylactic tarsal tunnel release to protect the tibial nerve when a large deformity is corrected; and, rarely, lengthening of the calf muscle (a Strayer gastrocnemius recession) where a tight calf holds the ankle pointing downwards.

A plantar fascia release where the arch is high and tight; a prophylactic tarsal tunnel release to protect the tibial nerve when a large deformity is corrected; and, rarely, lengthening of the calf muscle (a Strayer gastrocnemius recession) where a tight calf holds the ankle pointing downwards.

ONE OPERATION

When the deformity is moderate

When the deformity is moderate

The osteotomies, ligament work and replacement are done together — each correction carefully planned and simulated in 3D from the patient’s own weight-bearing CT scan before the day of surgery.

The osteotomies, ligament work and replacement are done together — each correction carefully planned and simulated in 3D from the patient’s own weight-bearing CT scan before the day of surgery.

TWO STAGES

When the deformity is severe

When the deformity is severe

The first operation corrects the deformity — osteotomies and, where needed, fusion of the hindfoot or midfoot joints. Once that has healed, the second operation is the replacement itself, usually some months later, with whatever residual correction is still required. Dr Alttahir does not fuse the subtalar joint at the same operation as a replacement. In his view, operating on both at once risks the blood supply of the talus and can precipitate avascular necrosis; many surgeons do combine them and report comparable results. A subtalar fusion is therefore done first and allowed to heal.

The first operation corrects the deformity — osteotomies and, where needed, fusion of the hindfoot or midfoot joints. Once that has healed, the second operation is the replacement itself, usually some months later, with whatever residual correction is still required. Dr Alttahir does not fuse the subtalar joint at the same operation as a replacement. In his view, operating on both at once risks the blood supply of the talus and can precipitate avascular necrosis; many surgeons do combine them and report comparable results. A subtalar fusion is therefore done first and allowed to heal.

EVERY CORRECTION IS CAREFULLY PLANNED AND SIMULATED IN 3D BASED ON THE PATIENT’S OWN WEIGHT-BEARING CT SCAN BEFORE THE DAY OF SURGERY · READ ABOUT 3D PLANNING →

THE OPERATION

Six stages, planned.

Six stages, planned.

Six stages, planned.

Theatre time depends on what is done around the replacement — usually between one and a half and three hours. Hospital stay is typically one to three nights, and the ankle goes into a boot rather than a plaster slab unless there is a reason for one.

Theatre time depends on what is done around the replacement — usually between one and a half and three hours. Hospital stay is typically one to three nights, and the ankle goes into a boot rather than a plaster slab unless there is a reason for one.

01

01

WORKUP

Detailed assessment

Detailed assessment

Standing X‑rays of the ankle and foot, including a hindfoot alignment (Saltzman) view; a CT for the plan; MRI where the soft tissues or the talus are in question; and examination of alignment, ligament stability, the circulation and the nerves.

02

02

PLANNING

A CT plan and patient-specific guides

A CT plan and patient-specific guides

The CT follows Stryker’s Prophecy protocol and the cutting guides are made from it. Dr Alttahir reviews and adjusts the plan — implant size and position, and each osteotomy — and designs the guides himself when the manufacturer cannot make them. He uses patient-specific guides because, in his hands, they make the cuts more accurate and the operation quicker and more controlled, with fewer X-rays in theatre. Where there is deformity, he models the limb in 3D first, so the alignment problem is understood before the implant is chosen.

03

03

ANAESTHESIA

Regional or general

Regional or general

Most patients have a regional nerve block for pain control after surgery, combined with a light general anaesthetic. The anaesthetist decides this with you.

04

04

APPROACH

Anterior, with the foot procedures through their own incisions

Anterior, with the foot procedures through their own incisions

A longitudinal incision at the front of the ankle, between the tendon that lifts the foot (tibialis anterior) and the tendon that lifts the big toe (extensor hallucis longus), exposes the tibia and talus. The heel shift, forefoot osteotomies and ligament work are done through their own incisions, several of them minimally invasive.

05

05

IMPLANTATION

Infinity, Inbone or Invision

Infinity, Inbone or Invision

The worn surfaces are cut away precisely through the guides, and the tibial and talar components are impacted into prepared bone with a polyethylene insert between them. Stryker Infinity is the standard implant; Inbone, with a stem into the tibia, where bone quality or deformity call for more fixation; Invision for revisions and alongside a custom 3D-printed talus component.

06

06

CLOSURE

Layered closure and a boot

Layered closure and a boot

The wounds are closed in layers and the ankle goes into a walking boot rather than a plaster slab unless there is a reason for one — the first step of the recovery protocol below.

SIGNATURE CAPABILITY

Custom 3D-printed talus component for an ankle replacement.

Custom 3D-printed talus component for an ankle replacement.

Custom 3D-printed talus component for an ankle replacement.

When the talus has collapsed — from avascular necrosis, severe trauma, or after a failed previous replacement — a standard ankle prosthesis has nothing to sit on. The established alternative is a fusion of the ankle and hindfoot — either accepting a shorter leg or bridging the gap with bone graft or a cage. It is a long operation that leaves a stiff ankle, and these fusions often fail to unite.

When the talus has collapsed — from avascular necrosis, severe trauma, or after a failed previous replacement — a standard ankle prosthesis has nothing to sit on. The established alternative is a fusion of the ankle and hindfoot — either accepting a shorter leg or bridging the gap with bone graft or a cage. It is a long operation that leaves a stiff ankle, and these fusions often fail to unite.

Illustration of the custom talus component design workflow
Illustration of the custom talus component design workflow

PATIENT-SPECIFIC TALUS COMPONENT · CUSTOM 3D-PRINTED TITANIUM · ILLUSTRATIVE WORKFLOW

A custom 3D-printed implant, designed by Dr Alttahir from the patient’s own CT, fills the bone defect in the talus. It couples with a total ankle replacement so that a talar component can be fitted, with the aim of avoiding an ankle fusion and keeping the ankle moving. The implant is manufactured in medical-grade titanium (Ti‑6Al‑4V), with porous-lattice surfaces where it meets the calcaneus and the navicular. Those two joints, the subtalar and talonavicular joints, are fused to the implant; the ankle joint itself is not fused.

A custom 3D-printed implant, designed by Dr Alttahir from the patient’s own CT, fills the bone defect in the talus. It couples with a total ankle replacement so that a talar component can be fitted, with the aim of avoiding an ankle fusion and keeping the ankle moving. The implant is manufactured in medical-grade titanium (Ti‑6Al‑4V), with porous-lattice surfaces where it meets the calcaneus and the navicular. Those two joints, the subtalar and talonavicular joints, are fused to the implant; the ankle joint itself is not fused.

This is a specialist procedure performed in a small number of centres across the world. It is a salvage procedure with limited long-term data. Its risks include infection, loosening or sinking of the implant, failure of the joints beneath it to fuse to the implant, and conversion to a fusion if it fails. Outcomes depend on individual case complexity and are discussed in detail before any decision is made.

REVISION ANKLE REPLACEMENT

When a previous replacement fails.

When a previous replacement fails.

When a previous replacement fails.

INBONE II total ankle replacement components: modular tibial stem, tibial tray, polyethylene insert and talar component.

INBONE II · MODULAR TIBIAL STEM · TRAY · POLY · TALAR COMPONENT

Revision ankle replacement is among the more demanding operations in lower-limb joint replacement. The options after a failed total ankle replacement are not the same as after a failed hip or knee — each carries its own balance of benefits, risks and long-term implications. In the Australian registry, the commonest reasons an ankle replacement is revised are loosening (about one in three revisions), infection (about one in seven) and bone cysts forming around the implant (about one in ten) (AOANJRR 2026 Ankle Supplementary Report).

Revision ankle replacement is among the more demanding operations in lower-limb joint replacement. The options after a failed total ankle replacement are not the same as after a failed hip or knee — each carries its own balance of benefits, risks and long-term implications. In the Australian registry, the commonest reasons an ankle replacement is revised are loosening (about one in three revisions), infection (about one in seven) and bone cysts forming around the implant (about one in ten) (AOANJRR 2026 Ankle Supplementary Report).

01

01

Revision replacement

Revision replacement

Replacement of one or both components with the Invision revision system — sometimes with a custom 3D-printed talus component where the talus has subsided or collapsed.

02

02

Conversion to tibiotalocalcaneal fusion

Conversion to tibiotalocalcaneal fusion

When replacement is no longer viable; the ankle and subtalar joints are fused together using a long intramedullary nail or plate.

03

03

Two-stage revision for infection

Two-stage revision for infection

Implants removed and an antibiotic-loaded spacer placed; antibiotics, intravenous at first and then tablets, for a course set by the infectious diseases physician; definitive reconstruction once the infection has cleared.

04

04

Custom 3D-printed talus component

Custom 3D-printed talus component

For talar collapse — discussed in detail in the previous section.

COMMON MODES OF FAILURE

01 —

Talar component subsidence

Talar component subsidence

One of the most common patterns of loosening — the talar component sinks into the talus over time.

02 —

Polyethylene wear

Polyethylene wear

Like in hip and knee replacements — the plastic bearing surface eventually wears.

03 —

Aseptic loosening

Aseptic loosening

Loss of fixation between implant and bone without infection.

04 —

Prosthetic joint infection

Prosthetic joint infection

Acute, delayed or late — managed similarly to infected hip/knee replacements.

05 —

Periprosthetic fracture

Periprosthetic fracture

Fracture in the tibia, fibula or talus around the implant.

06 —

Component malposition

Component malposition

Implants placed outside the safe zone — early pain, accelerated wear.

In the Australian registry, nearly half of all revisions of an ankle replacement are an exchange of the polyethylene insert rather than removal of the metal components (AOANJRR 2026 Ankle Supplementary Report).

In the Australian registry, nearly half of all revisions of an ankle replacement are an exchange of the polyethylene insert rather than removal of the metal components (AOANJRR 2026 Ankle Supplementary Report).

READ ABOUT REVISION JOINT REPLACEMENT

READ ABOUT REVISION JOINT REPLACEMENT →

→

RECOVERY

A typical timeline.

A typical timeline.

A typical timeline.

Every recovery is individual. The timeline below is Dr Alttahir’s usual protocol for a primary ankle replacement; where osteotomies, ligament reconstruction or a staged correction are part of the plan, the protected period is longer and is set case by case. Yours will be tailored to your bone quality, alignment, soft tissues and overall health.

Every recovery is individual. The timeline below is Dr Alttahir’s usual protocol for a primary ankle replacement; where osteotomies, ligament reconstruction or a staged correction are part of the plan, the protected period is longer and is set case by case. Yours will be tailored to your bone quality, alignment, soft tissues and overall health.

WEEK 0

Hospital stay

One to three nights typically. A regional block for pain, and a boot rather than a plaster slab unless there is a reason for one; early mobilisation on crutches, non-weight-bearing on the operated ankle.

WEEKS 1–4

WEEKS 1–4

Wound check, then sutures out

Wound check, then sutures out

Elevation. Wound check at two weeks; sutures removed at four weeks. The boot stays on.

Elevation. Wound check at two weeks; sutures removed at four weeks. The boot stays on.

WEEKS 0–6

The boot, without weight — usually

Non-weight-bearing while the bone grows onto the implant and any bone cuts heal. With good bone and no osteotomy to protect, static loading — standing with weight through the planted foot, not walking — can start as early as the first week.

WEEK 6

WEEK 6

Weight-bearing begins

Weight-bearing begins

Walking in the boot after an X‑ray check. Physiotherapy begins.

Walking in the boot after an X‑ray check. Physiotherapy begins.

WEEKS 6–12

Transition to a shoe

Out of the boot into supportive footwear, typically by 10–12 weeks. Range-of-motion and strengthening physiotherapy continues.

MONTHS 3–12

MONTHS 3–12

Functional recovery, then plateau

Functional recovery, then plateau

Return to most daily activities over three to six months; driving generally resumes once full control of the foot is achieved. Low-impact exercise — swimming, cycling, the elliptical — is encouraged. Most patients reach their maximum benefit by about twelve months, and long-term review continues to monitor implant position and wear.

Return to most daily activities over three to six months; driving generally resumes once full control of the foot is achieved. Low-impact exercise — swimming, cycling, the elliptical — is encouraged. Most patients reach their maximum benefit by about twelve months, and long-term review continues to monitor implant position and wear.

WHAT TO EXPECT

What to expect.

What to expect.

What to expect.

Total ankle replacement is a good operation in the right patient. It is also major surgery on a complex joint — and realistic expectations are part of good consent.

Total ankle replacement is a good operation in the right patient. It is also major surgery on a complex joint — and realistic expectations are part of good consent.

Pain relief is the primary goal

Most patients experience meaningful improvement in pain and function — but the precise outcome cannot be guaranteed for any individual.

Motion is preserved, not perfected

A replaced ankle retains useful motion but rarely matches a native, healthy ankle. Compared with fusion, however, the difference is substantial.

Implants are not permanent

Modern ankle implants have improved markedly, but like hip and knee implants they have a finite lifespan. In the Australian registry about 13.0% of primary ankle replacements for osteoarthritis had been revised at ten years across all eras, with lower figures so far for implants placed since 2015; younger age raises the risk (AOANJRR 2026 Ankle Supplementary Report), and higher body weight may also do so. Long-term follow-up is part of the plan.

Activity is moderated long-term

Most patients return to walking, cycling, swimming, golf and similar activities. High-impact sport, jumping and heavy manual labour are generally discouraged.

The procedures around the replacement add to the recovery

Osteotomies and ligament reconstructions have to heal as well as the replacement, so protected weight-bearing is often longer, and a staged correction means two operations and two recoveries.

Complications happen

The risks common to operations on the lower limb are infection, bleeding, blood clots in the leg or lung, injury to a nerve or blood vessel, stiffness, pain that persists, slow or failed healing where bone is cut, the complications of anaesthesia, and the need for further surgery.

The risks particular to ankle replacement are wound-healing problems, a fracture of the ankle bones during or after surgery, loosening or sinking of the implant, cysts in the bone around it, ongoing pain or stiffness, and conversion to a fusion; amputation is rare.

Their likelihood in your case is discussed in detail before surgery.

Revision is harder than primary

If a replacement does eventually fail, revision options exist but are more demanding. This is part of the decision when choosing replacement over fusion in younger patients.

COSTS & HEALTH FUNDS

A clear conversation about cost.

A clear conversation about cost.

A clear conversation about cost.

Surgery is a financial decision as well as a medical one. Fees are discussed with you first and take your circumstances into account; once surgery is booked, and before the operation, you receive written informed financial consent with a complete estimate.

Surgery is a financial decision as well as a medical one. Fees are discussed with you first and take your circumstances into account; once surgery is booked, and before the operation, you receive written informed financial consent with a complete estimate.

FEES AND HEALTH FUNDS

Agreed before surgery

Dr Alttahir’s fees are set by reference to the AMA List of Medical Services and Fees. No-gap arrangements are not offered for ankle replacement, so there is an out-of-pocket cost; it is discussed with you first and set out in writing before anything is booked.

A custom 3D-printed talus component for an ankle replacement is a custom implant and requires ex-gratia approval from your health fund, which the rooms request on your behalf. Once surgery is booked you receive a complete written estimate of Dr Alttahir’s fee, the Medicare and health-fund contributions and the amount you would pay, with a note on the separate accounts from the anaesthetist, surgical assistant, hospital and any imaging or pathology.

TYPICAL FEE COMPONENTS

What’s quoted to you

• Surgeon’s fee

• Anaesthetist’s fee

• Surgical assistant’s fee

• Hospital and theatre fees

• Implant costs — standard implants are generally covered by funds; a custom implant needs ex-gratia approval

Each component is itemised so you can see what is and isn’t covered by your fund — and what you may owe out of pocket.

This page does not constitute a fee quotation. Costs and health-fund coverage vary by individual circumstance and are confirmed individually in writing before surgery. This page has been written in line with the Ahpra Guidelines for advertising a regulated health service.

FOR REFERRERS

When to refer for ankle replacement.

When to refer for ankle replacement.

When to refer for ankle replacement.

Referral is appropriate when ankle arthritis is symptomatic despite non-operative care — especially when fusion versus replacement is the question, or when the ankle is deformed and the patient has been told it cannot be replaced.

Referral is appropriate when ankle arthritis is symptomatic despite non-operative care — especially when fusion versus replacement is the question, or when the ankle is deformed and the patient has been told it cannot be replaced.

SUITABLE FOR ROUTINE REFERRAL

Symptomatic ankle arthritis on X‑ray

Symptomatic ankle arthritis on X‑ray

Pain not controlled with non-operative care

Pain not controlled with non-operative care

Patient considering surgical options

Patient considering surgical options

Discussion of fusion versus replacement

Discussion of fusion versus replacement

COMPLEX / SPECIALIST REFERRAL

Failed previous ankle replacement

Failed previous ankle replacement

Suspected talar avascular necrosis or collapse

Suspected talar avascular necrosis or collapse

Ankle arthritis with varus or valgus deformity, or after previous hindfoot surgery

Ankle arthritis with varus or valgus deformity, or after previous hindfoot surgery

Failed ankle fusion — non-union, malunion, or a fusion being considered for takedown

Failed ankle fusion — non-union, malunion, or a fusion being considered for takedown

Charcot or post-infective arthritis

Charcot or post-infective arthritis

PLEASE INCLUDE

• Weight-bearing X‑rays of both ankles and feet, with Saltzman (hindfoot alignment) views

• CT if available — essential for revision and deformity cases

• EOS or long-leg standing alignment films where limb alignment is in question (Macquarie Medical Imaging at Macquarie University Hospital, or PRP Imaging at Norwest Private Hospital)

• Mechanism and date of any prior injury

• Previous operative notes and implant details, if relevant

• Comorbidities — diabetes, smoking, vascular disease

• Functional limitations and patient goals

SYDNEY ADVANCED ORTHOPAEDICS · (02) 8882 9011 · MACQUARIE · NORWEST · EAST SYDNEY

LIMB RECONSTRUCTION SERVICE NSW · (02) 9602 1113 · CAMPBELLTOWN

COMMON QUESTIONS

What patients most often ask.

What patients most often ask.

What patients most often ask.

Most patients regain a more natural gait after an ankle replacement than after a fusion, because the ankle continues to move. Walking on flat ground typically becomes comfortable within three to six months; uneven ground, hills and stairs usually improve over six to twelve months. Some long-term limitations remain — running and high-impact sport are generally discouraged — and the outcome cannot be guaranteed for any individual.

Most patients regain a more natural gait after an ankle replacement than after a fusion, because the ankle continues to move. Walking on flat ground typically becomes comfortable within three to six months; uneven ground, hills and stairs usually improve over six to twelve months. Some long-term limitations remain — running and high-impact sport are generally discouraged — and the outcome cannot be guaranteed for any individual.

BEGIN

Bring the ankle imaging.
Replace, fuse or wait.

Bring the ankle imaging.
Replace, fuse or wait.

Bring the ankle imaging.
Replace, fuse or wait.

Bring your X‑rays and any CT or previous operation notes. The first consultation is about the right diagnosis and the right next step — whether that involves surgery or not. If non-operative care still has options, those are explored first.

Bring your X‑rays and any CT or previous operation notes. The first consultation is about the right diagnosis and the right next step — whether that involves surgery or not. If non-operative care still has options, those are explored first.

This page provides general information about total ankle replacement and is not a substitute for individual medical advice. Surgery carries risks; outcomes vary between patients. Total ankle replacement and ankle fusion are both valid operations, selected based on individual case suitability. Custom implant procedures are performed in selected cases only. Diagrams are schematic and illustrative only. Advertising on this site complies with the AHPRA Guidelines for advertising a regulated health service.